parameter fault
英 [pəˈræmɪtə(r) fɔːlt]
美 [pəˈræmɪtər fɔːlt]
网络 参数故障
双语例句
- Aiming to solve the actuators fault diagnosis problem for underwater vehicle ( in short, UV), a parameter bias actuator fault model and UV's horizontal plane motion model are set up.
针对水下航行器执行机构故障论断问题，建立了航行器推进器及舵等执行机构的偏差型故障模型和航行器水平面运动模型； - A parameter adaptive fault location scheme based on the combination of particle swarm optimization algorithm and least squares method
基于粒子群-最小二乘混合算法的参数自适应故障测距方法 - Parameter Calculation of Fault Information for Power Line
电力线故障信息参数计算 - By investigating 4 groups of test data of a certain type of engine, 24 original attributions were reduced to 2 groups, each group had 2 attributions, Critical parameter combinations for fault diagnosis for liquid rocket engine were obtained;
分析了某型号发动机的4组试车数据，将原来的24个属性约简为2组，每组有2个属性，得到了在该样本集中所有可能的、关键的、决定性的故障诊断因素的组合。 - In this article, based on the large-scale off-design mathematic model, a thermal parameter fault diagnosis system is set up for nuclear power steam turbine.
利用核电汽轮机热力系统大范围变工况（全工况）数学模型建立核电热力系统故障诊断系统。 - Then a simplified algorithm was proposed in order to achieve parameter optimization of fault classifier for turbo-generator sets.
依据该简化算法，实现了故障分类器的参数优化，并应用于汽轮发电机组的故障分类。 - After signal local wave decomposition, the information entropy according to time-frequency distribution was established, and it was used as characteristic parameter for fault recognition.
对信号进行局域波分解后，建立基于时频分布的信息熵，以此作为故障识别的参数。 - This paper introduces in details how to diagnose the faults of the engine electronic control system on FUKANG car, adopting such methods as fault code inquiring, technical parameter inspecting, fault sign schedule inquiring and fault sign simulating.
详细介绍采用故障代码查询法、技术参数检测判断故障法、查故障征兆一览表法及故障征兆模拟法，对富康轿车发动机电控系统故障进行诊断。 - This paper briefly describes the application of automatic test in radar parameter test and fault detection, and introduces the component parts of automatic test equipment.
本文概述了自动测试在雷达参数测试和故障检测中的应用，并介绍了自动测试设备的组成情况。 - In this paper, a parameter robust fault detector and a suitable fault vector identifier for the dynamic system with uncertain parameters are designed, and correction algorithms of the state vector and the output vector are proposed.
本文针对有参数不确定性的动态系统设计了一种参数鲁棒故障检测器及故障向量辨识器，提出了状态向量和输出向量的校正方法。 - This principle can meet the demand of structural or parameter fault diagnosis simultaneously and the demand of universality.
这一故障诊断机理，能满足同时进行结构性故障诊断和参数性故障诊断的要求，以及通用性要求； - Choice of the Best Parameter in Fault Tree Analysis Approximate Computation
故障树近似计算中最优权因子的选取 - A new method to obtain the best testable parameter set for fault diagnosis of analog circuit is presented.
介绍了一种提取电路最佳可测性参数集以诊断电路故障的新方法。 - The experiment shows that the method is simple and viable, the complexity is an application of non-liner dynamics parameter in machinery fault diagnosis.
实验证明该方法简单易行，诊断可靠，说明复杂度是非线性动力学参数在机械故障诊断中的新应用。 - Data Distribution Based Kernel Parameter Optimization for Fault Classifier
基于数据分布的故障分类器核函数参数优化 - The distribution character parameter, the fault rate and renovation rate was counted as qualitative and quantitative evidence for reliability count method of system at starting status.
计算有关分布特性参数、故障率、修复率等。为分析系统在启动状态下的可靠性提供可靠的定性和定量依据。 - A Fault Diagnosis Method Based on AR Parameter Fault Vector and Gray Neural Network
基于AR模型参数向量的灰度神经网络故障诊断方法 - Multiplayer parameters searching algorithm, equi-dimension means and vary dimension means based on LS-SVM can be used in aeronautical quality evaluation, fault diagnosis, prediction of parameter and fault analysis for plane.
基于支持向量机的多层参数寻优、等维信息一步预测和不等维信息多步预测，可用于飞机状态评估、故障诊断和参数预测以及故障率分析。 - The searching and iteration method is used to locate the fault point in a segment of short-line according to the distributed law of positive sequence fault component voltage. The problem of distributed parameter long-line fault locating is converted to that of the lumped parameter short-line fault locating.
该方法基于线路分布参数模型，根据正序故障分量电压沿线分布规律，通过搜索迭代将故障点界定在一段短线路上，从而将分布参数长线测距转化为集中参数短线测距。 - Machine parameter identification and fault detection for the alternator system
发电机系统的机器参数辨识与故障检测 - The parameter identification and fault diagnosis used for nonlinear systems is a problem having puzzled us a long time.
非线性系统的辨识和故障诊断是一个长期困扰的问题。 - Secondly, we construct the energy management system from the aspects of energy consumption statistic, equipment runtime statistic, parameter statistic and fault alarm.
随后对主教楼的能源管理系统进行建设，从耗能统计、设备运行统计、参数统计、故障报警等方面进行。 - It regards the variation of parameter of fault structure as a perturbation on the perfect structure. Crack fault of the double decker space frame is probability diagnosed as an example.
将故障结构的参数变化看作是对完好结构参数的摄动，以圆截面双层空间刚架的裂纹故障为例对其进行了概率诊断。 - Improved Algorithm for the Lump Parameter Based Single-ended Fault Location Models
适用于集中参数单端测距模型的距离修正方法 - To Determine the Analytic Method of Geometrical Parameter of Fault
确定断层几何参数的解析方法 - The transformer is divided into eight major parts, and the relationship between the parameter indicators and fault of each part is deeply analyzed.
将变压器划分为八个主要部件，针对每个部件深入分析指标参量和故障的对应关系。 - The B/ S model software will mainly accomplish user management 、 parameter setting 、 fault management and so on.
B/S模式的程序主要完成用户管理、参数设置、故障管理等功能。 - Discussion has been done on relationship between DDVS and Volterra series, and DDVS stability in parameter estimation and fault information capability have been analyzed. Then fault characteristics extracting method based on DDVS parameter estimation was represented.
重点讨论了DDVS与Volterra级数的关系，分析了DDVS在参数估计中的数值稳定性和故障特征聚类性；提出了基于DDVS参数估计的故障特征提取方法。 - C lan-guage was used to program the procedures of controller interface, time and parameter setting, fault recording and auto-tracking compensation, etc. In the auto-tracking compensation procedure, the three-point measurement was to track capacitive current.
用C语言编写了控制器人机界面、参数设置、时间设置、自动跟踪补偿、故障记录等程序。 - With the development of digital design, power supply engineer not only require real time monitoring system condition, but also demand flexibly set up system parameter, quickly fault repairing, accelerate research process.
随着电子设计数字化的发展，设计人员不仅要求能够实时监控系统运行状态，还在灵活设置电源参数，诊断电源故障，快速完成设计方面提出了更好的要求。